This oil pump outlet plate is for engines intended to run a “full flow” external oil line system. To use this system, the block must be tapped for a return line. In addition, the oil pump outlet hole must be threaded and a plug installed to force the oil out the cover plate. Commonly used to install a filter or external oil cooler system. A brass fitting is included to fit a 1/2″ diameter rubber hose.
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 6 × 2 in |
Brass Oil Fitting, 90 Degree. Female end is 3/8 NPS and male end is for 1/2″ hose….#80-0390
German made Engine Gasket Set, for rebuilding your 1300, 1500, 1600 and larger long block……#91-0070 The main seal (flywheel seal) is not included in this set.
Oil Pump, Heavy Duty 30mm…..Fits engines with “flat” style cam gear up to 1970, or any high performance cam…… .#80-0162HD
Stub Axle Bolt Kit for all IRS and Super Beetle models ’69 and later. Eight 12.9 grade bolts with washers. This kit will also work great for the torsion bar cover plates on all 71 and later cars….#95-2602
Steering Shaft with Joints, 71 to 74 Super Beetle……#87-0144
Rear Stub axle rebuild kit. Fits all 69 and later bugs including Super Beetle……89-0150
Camber Adjusting Bolt, all Super Beetle. Contains bolt, two washers, and lock nut. sold Each……#88-2510