Use this tool any time you vary the width of an engine. Stroked engines, or ones with alternative valve train parts, rockers, or cylinder spacers will almost always require a custom length pushrod. Screw adjustment with lock nut lets you set the ideal pushrod length for correct valve train geometry!
| Weight | 2 lbs |
|---|
Pushrods, 3/8″ Chrome-Moly, cut to length, One end out, .058″ wall, Manton brand….#40-0585S
Laser Cut Cylinder Spacers for 90.5 & 92mm cylinders. . .160″ thick….#70-0700
Laser Cut Cylinder Spacers for 94mm cylinders. Available from .160″ to .320″ thickness….70-0720
Cylinder Shims, 90.5/92 X .045″ thick. Original USA Production Set of 20 for production engine builders…#60-0520K
Intake Grommets, Pair, All Dual Port Engines 71 and later…..#15-0820
Ball Joint for 71 to 73 Super Beetle…..#87-0141
Strut Mounting Bolts for 71-73 Super, Race Grade, Set of six ….#95-2600
Brake Fluid Line, Blue (sometimes black with blue-green stripe), German, 1.5 ft piece. Used to connect the master cylinder to the metal feed lines, and also connect the reservoir to the feed lines on top…..#15-0461