This “torquemeister” tool is a great option for those shops that lack a large torque wrench, or air powered tools. Use it to tighten or loosen 36mm flywheel gland nut, or rear axle nut. When used on the rear axle nut, just set your torque wrench to 30 ft/lbs, and you get 270 ft/lbs at the axle nut. On the flywheel nut, set your torque wrench to 24 ft/lbs, and you get 216 ft/lbs to the gland nut. Can be used on 4 lug (4x130mm) or 5 lug (5x205mm) rear brake drums.
| Weight | 6 lbs |
|---|---|
| Dimensions | 10 × 6 × 3 in |
Trans Mount, Front, Solid Steel Racing. Fits all 73 and later Super Beetle and Standard Beetle. Race grade mounting bolts included…….#88-1304S
Clutch Bolt Set, Balanced, Grade 10.9 with Washers……..#95-0020
C/V Bolts, Race Grade, with 12 Point External Drive…Set of 24 replace hard to clean and torque internal spline bolts. With these bolts it’s easy to achieve the 25 ft. lb. tightening torque specified by VW..…#88-1440
Carb Adapter, allows installation of the Solex 30/31 PICT or 30 PICT-2 Carburetor to Dual Port Manifold….#15-0017